COLOR TYPE :: TFT  COLOR TYPE :: B/W
 CHARACTER TYPE :: WITH LED BACKLIGHT  CHARACTER TYPE :: NO BACKLIGHT
 GRAPHIC TYPE :: WITH LED BACKLIGHT  GRAPHIC TYPE :: NO BACKLIGHT
 Module 
COLOR TYPE -TRT
176 x RGB(H) x 220(V)       TFT (2.0 inch) Model : EDG020A01TOXGB
DIMENSIONAL DRAWING DOWNLOAD    form in PDF format
FEATURE : BLOCK DIAGRAM
  1. Display Mode: TFT(2.0 inch)/Negative/
                           Transmissive
  2. Driving voltage: VDD=2.8V
  3. Viewing angle: 12 O'Clock
  4. Operating temp: -20C~+70C
    Storage temp: -30C~+80C
  5. Drive IC: NT39106
  6. Interface: 80PARALLEL
  7. Unspecified tolerance is +0.2mm
  8. Backlight Color: White
ELECTRO-OPTICAL CHARACTERISTICS
ITEM SYMBOL CONDITIONS MIN TYPE MAX UNIT REMARK
Esponse time Rise Tr =0 - 15 - ms Note4
Fall Tf - 20 - ms
Contrast ratio CR At optimize viewing angle 250 300 - - Note5
Transmilttance --     5.0   %  
Viewing Angle Top --- CR5 30 60 - deg. Note6
Bottom 10 20 -
Left 30 45 -
Right 30 45 -
Color Tone White Wx =0 0.26 0.31 0.36 - Note7
Wy 0.27 0.32 0.37

Input/Output Signal Interface

NO PIN name I/O Description NO PIN name I/O Description
1

DB15

 I/O

Command/Data bus D15 (for 8/16 bits)

 18 VVD P DC/DC & internal logic Power
2

DB14

I/O Command/Data bus D14 (for 8/16 bits) 19 VVD P DC/DC & internal logic Power
3

DB13

 I/O

Command/Data bus D13 (for 8/16 bits)

 20 /RD I This pin is read control signal
4

DB12

 I/O

Command/Data bus D12 (for 8/16 bits)

 21 /WR I This pin is write control signal
5 DB11 I/O Command/Data bus D11 (for 8/16 bits) 22 RS I Command/Data selection
6

DB10

 I/O Command/Data bus D10 (for 8/16 bits) 23

/CS

 I This pin is used for chip select signals.
7 DB9 I/O Command/Data bus D9 (for 8/16 bits) 24

/RESET

 I

When/RESET is L,an internal reset is performed

8 DB8 I/O Command/Data bus D8 (for 8/16 bits) 25

MODE

P Interface Power
9 GND P GND 26 GND P GND
10 DB7 I/O Data bus D7 (for 16 bits) 27

AN

P Anode of LED
11 DB6 I/O Data bus D6 (for 16 bits) 28

CA1

P Cathode of LED
12 DB5 I/O Data bus D5 (for 16 bits) 29

CA2

 P Cathode of LED
13 DB4 I/O Data bus D4 (for 16 bits) 30 CA3 P Cathode of LED
14 DB3 I/O Data bus D3 (for 16 bits) 31~34 NC    
15 DB2 I/O Data bus D2 (for 16 bits) 35 ID   Ground Level
16 DB1 I/O Data bus D1 (for 16 bits) 36 NC    
17 DB0 I/O Data bus D0 (for 16 bits)