COLOR TYPE :: TFT  COLOR TYPE :: B/W
 CHARACTER TYPE :: WITH LED BACKLIGHT  CHARACTER TYPE :: NO BACKLIGHT
 GRAPHIC TYPE :: WITH LED BACKLIGHT  GRAPHIC TYPE :: NO BACKLIGHT
 Module 
COLOR TYPE -TRT
176 x RGB(H) x 220(V)        TFT (2.0 inch) Model : EDG020A01TOXGA
DIMENSIONAL DRAWING DOWNLOAD    form in PDF format
FEATURE : BLOCK DIAGRAM
  1. Display Mode: TFT(2.0 inch)/Negative/
                           Transmissive
  2. Driving voltage: VDD=2.8V
  3. Viewing angle: 12 O'Clock
  4. Operating temp: -20C~+70C
    Storage temp: -30C~+80C
  5. Drive IC: NT39106
  6. Interface: 80PARALLEL
  7. Unspecified tolerance is +0.2mm
  8. Backlight Color: White
ELECTRO-OPTICAL CHARACTERISTICS
ITEM SYMBOL CONDITIONS MIN TYPE MAX UNIT REMARK
Esponse time Rise Tr =0 - 15 - ms Note4
Fall Tf - 20 - ms
Contrast ratio CR At optimize viewing angle 250 300 - - Note5
Transmilttance --     5.0   %  
Viewing Angle Top --- CR5 30 60 - deg. Note6
Bottom 10 20 -
Left 30 45 -
Right 30 45 -
Color Tone White Wx =0 0.26 0.31 0.36 - Note7
Wy 0.27 0.32 0.37

Input/Output Signal Interface

NO PIN name I/O Description Remark NO PIN name I/O Description Remark
1

LED_AN

P

Anode of LED

  16 DB6 I/O Data bus D6 (for 16 bits)  
2

LED_CA

P Gathodo of LED   17 DB5 I/O Data bus D5 (for 16 bits)  
3

IMO

I

8/16bits select

NOTE 1 18 DB4 I/O Data bus D4 (for 16 bits)  
4

NC

 

No connection

  19 DB3 I/O Data bus D3 (for 16 bits)  
5 NC   No connection   20 DB2 I/O Data bus D2 (for 16 bits)  
6

/RESET

I When /RESET is L, an internal reset is performed   21 DB1 I/O Data bus D1 (for 16 bits)  
7 DB15 I/O Command/Data bus D15 (for 8/16 bits)   22 DB0 I/O Data bus D0 (for 16 bits)  
8 DB14 I/O Command/Data bus D14 (for 8/16 bits)   23

/RD

I This pin is read control signal.  
9 DB13 I/O Command/Data bus D13 (for 8/16 bits)   24

/WR

I This pin is write control signal.  
10 DB12 I/O Command/Data bus D12 (for 8/16 bits)   25

RS

I Command/Data selection  
11 DB11 I/O Command/Data bus D11 (for 8/16 bits)   26 /CS I This pin is used for chip select signals.  
12 DB10 I/O Command/Data bus D10 (for 8/16 bits)   27

IOVCC

P Interface Power  
13 DB9 I/O Command/Data bus D9 (for 8/16 bits)   28

VCI

P DC/DC & internal logic Power  
14 DB8 I/O Command/Data bus D8 (for 8/16 bits)   29

VSS

P GND  
15 DB7 I/O Data bus D7 (for 16 bits)